Through Bore Slip Ring

Through Bore Slip Ring

Customer Satisfied
0%

Attached Document

Number of Circuits:06/12/18/24

Current:5A(Signal)/10A/15A

Insulation Resistance:≥500MΩ@500VDC

Wire Length:rotor/stator:300mm

Voltage:240VAC/DC

LPT series are through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.

 

Features:

◎Transmit analog and digital signal

◎The power and signal are mixed transmitted, and the signal categories are as follows:

◎Ethernet: Rate (10Mbps/100Mbps/1000Mbps)

◎Industrial Ethernet: EtherNet , EtherCAT ,ProfiNet, Powerlink , SercosIII/IP, etc.

◎HD video: SDI, LVDS, etc.

◎Serial communication: RS232, RS485, RS422, etc.

◎Universal Serial Bus: USB2.0

◎Industrial Fieldbus: CANBus,ProfiBus, InterBus, CC-Link, DeviceNet, etc.

◎Sensor signal: thermal resistance, thermocouple, strain gauge, etc.

◎Long service life, maintenance-free

◎Easy to install

 

Main Applications:

◎Industrial automation equipment/Medical equipment/Wind power equipment/Test equipment/Exhibition / display equipment/Robots/Turntable equipment/Amusement equipment/High-speed railway equipment/Packaging machinery/Ship offshore equipment/Construction machinery